The 8th International Symposium on fracture mechanics of ceramics was held in on the campus of the University of Houston, Houston, TX, USA, on February 25-28, 2003. With the natural maturing of the fields of structural ceramics, this symposium focused on nano-scale materials, composites, thin films and coatings as well as glass. The symposium also addressed new issues on fundamentals of fracture mechanics and contact mechanics, and a session on reliability and standardization.
€309.23
Table of Content
Contact Mechanics.- Atomic Force Microscopy at Ultrasonic Frequencies.- Indentation Size Effect on the Hardness of Zirconia Polycrystals.- Indentation Fracture, Acoustic Emission and Modelling of the Mechanical Properties of Thin Ceramic Coatings.- Nanoindentation, Nanoscratch and Nanoimpact Testing of Silicon-Based Materials with Nanostructured Surfaces.- Microstructural Control of Indentation Crack Extension under Externally Applied Stress.- Instrumented Hardness Test on Alumina Ceramics and Single Crystal with Spherical Indenter.- Glass.- Controlling the Fragmentation Behavior of Stressed Glass.- Elasto-Plastic Behavior of Glassy Carbon and Silica Glass by Nano-Indentation with Spherical Tipped Indenter.- Scratch Test for Evaluation of Surface Damage in Glass.- Shear Driven Damage and Internal Friction in Indentation Loading of a Glass-Ceramic.- Indentation and Scratching of Glass: Load, Composition and Temperature Effects.- Effects of Tin on the Physical Properties and Crack Growth in Soda-Lime-Silica Float Glass.- Indentation Size Effect for Glasses: Yes, There is a Fracture Contribution.- Fracture of Nano-Scale Materials.- Slow Crack Propagation in Ceramics at the Nano- and Micro-Scale: Effect of the Microstructure.- Toughening and Strengthening Mechanisms in Nanocomposites Based on Dislocation Activity.- Composites.- Creep Behavior and Mechanism for CMCs with Continuous Ceramic Fibers.- Strain Accumulation and Damage Evolution During Creep of Si Cf/Si C Composites.- Modelling Multilayer Damage in Cross-ply Ceramic Matrix Composites.- Quantification of Toughness Increase Due to Metal Particles in Glass Matrix Composites.- Fracture Resistance of Hybrid Glass Matrix Composite and Its Degradation Due to Thermal Ageing and Thermal Shock.- Creep Investigation of Si Cf-Si BC Composites.- Fracture Toughness of Ba Ti O3-Mg O Composites Sintered by Spark Plasma Sintering.- Fracture Toughness of Ba Ti O3 and Ba Ti O3-Al2O3 Composite under Electric Field.- Room Temperature Post-Fracture Tensile (PFT) Study of Two Fiber-Reinforced Ceramic Matrix Composites with a “Strong” Fiber/Matrix Interface.- A FE Model of Carbon/Carbon Composite Fracture.- Fracture Fundamentals.- Tailoring the Composition of Self-Reinforced Silicon Nitride Ceramics to Enhance Mechanical Behavior.- Nonlinear Fracture of a Polycrystalline Graphite — Size-Effect Law and Irwin’s Similarity.- Fragmentation of Ceramics in Rapid Expansion Mode.- Experimental Approach to Microfracture Process of Ceramics under Thermal Shock.- Finite Element Analysis of Crack-Path Selection in a Brick and Mortar Structure.- Investigation of Crack Growth Process in Dense Hydroxyapatite Using the Double Torsion Method.- Crack Propagation Behavior of Alumina with Different Grain Sizes under Static and Cyclic Fatigue.- Effects of Pore/Grain-Size Interaction and Porosity on the Fracture of Electroceramics.- Fracture of Coatings.- Fracture Behaviour of Plasma Sprayed Thermal Barrier Coatings.- Particle Impact Damage and Point Load-Induced Fracture Behavior in Zirconia Plasma Spray Coating Film.- Model I, Mode II, and Mixed-Mode Fracture of Plasma-Sprayed Thermal Barrier Coatings at Ambient and Elevated Temperatures.- Ferroelectric Materials.- Modeling of Fracture in Ferroelastic Ceramics.- Strength and Reliability of Lead Zirconate Titanate Ceramics.- Reliability Prediction, Standardization and Design.- Standard Reference Material 2100: Fracture Toughness of Ceramics.- Measuring the Real Fracture Toughness of Ceramics: ASTM C 1421.- Predicting the Reliability of Brittle Material Structures Subjected to Transient Proof Test and Service Loading.- Estimation and Simulation of Slow Crack Growth Parameters from Constant Stress Rate Data.- On Integrity of Flexible Displays.- Fracture of Conductive Cracks in Poled and Depoled PZT-4 Ceramics.- Increasing Resistance to Low Temperature Ageing Degradation of Y-TZP by Surface Modification.
Language English ● Format PDF ● Pages 636 ● ISBN 9780387289205 ● File size 10.4 MB ● Editor R.C. Bradt & D. Munz ● Publisher Springer US ● City NY ● Country US ● Published 2010 ● Downloadable 24 months ● Currency EUR ● ID 2144522 ● Copy protection Social DRM
More ebooks from the same author(s) / Editor
16,715 Ebooks in this category
