John R. Wagner 
Handbook of Troubleshooting Plastics Processes 
A Practical Guide

This handbook provides a framework for understanding how to
characterize plastic manufacturing processes for use in
troubleshooting problems. The 21 chapters are authored by
well-known and experienced engineers who have specialized knowledge
about the processes covered in this practical guide.

From the Preface:

‘In every chapter, the process is described and the most
common problems are discussed along with the root causes and
potential technical solutions. Numerous case studies are provided
that illustrate the troubleshooting process. Mark A. Spalding,
The Dow Chemical Company

Jadual kandungan

Preface xvii

1. The Economics of Troubleshooting Polymer Processing Systems
1

2. Troubleshooting Philosophy 19

3. Statistical Tools for Trouble Shooting a Process 25

4. Single Screw Extrusion 45

5. Troubleshooting the Co-rotating Fully Intermeshing Twin-screw
Compounding System 53

6. Troubleshooting for Injection Molding 65

7. Blown Film 85

8. Cast Film Troubleshooting 109

9. Oriented Films – Trouble Shooting and Characterization
129

10. Troubleshooting the Thermoforming Process 163

11. Proper Equipment Processing for Industrial/Technical Blow
Molding 213

12. PET Stretch Blow Molding

13. Blow Molding – Problems and Solutions 275

14. Extrusion Coating Troubleshooting 293

15. Adhesive and Thermal Lamination 309

16. Troubleshooting for Retomolding 323

17. Plastics Calendering 355

18. Compression Molding 375

19. Transfer molding 389

20. Pultrusion Process Troubleshooting 399

21. Troubleshooting Static Problems in Plastics Processes
433

References 470

Recommended reading for further study 471

Index 473

Mengenai Pengarang

About the Editor:

After gaining his MS in chemical engineering from the University
of Notre Dame in 1964, John Wagner worked in the Films Division at
Mobile Chemical Company for thirty years. He is now a consultant in
plastics products and processes. He has twenty-three patents to his
name and is the editor of Journal of Plastic Film and
Sheeting and editor or co-editor of four books on extrusion and
packaging. John is a Fellow of the Society of Plastics Engineers
and serves on the Extrusion Division and Flexible Plastics
Packaging Division boards.